SPSY series single point stainless steel load cells

Stainless steel load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 500x400 mm.

CAPACITIES (kg): 10, 20, 50, 100.

OIML R60. C3 precision class.

17-4 PH stainless steel. IP68/IP69K protection.

MAIN FEATURES

• C3 precision class.
• Off center load compensated.
• Made in 17-4 PH stainless steel.
• IP68/IP69K protection.
• Max. capacities from 10 to 100 kg.
• For platforms with dimensions up to 500 x 400 mm.
• Shielded connection cable.
• Test certificate available upon request.

TECHNICAL FEATURES

• Minimum load cell verification interval: Vmin = EMax / 10.000
• Maximum number of verification intervals: nLC = 3000
• Full Scale Output: 2mV/V +/- 10%
• Temperature effect on zero: ±0,014% F.S./10K
• Temperature effect on full scale output:
  • ±0,0117% F.S./10K (-10°C/+20°C)
  • ±0,0175% F.S./10K (+20°C/+40°C)
• Compensated Temperature Range: -10°C/+40°C
• Operating Temperature Range: -10°C/+50°C
• Creep at nominal load in 30 minutes: ± 0,01% F.S.
• Maximum tolerated excitation voltage: 15 VDC
• Input Resistance: 380 ± 15 Ohm
• Output Resistance: 350 ± 10 Ohm
• Insulation Resistance (100V) >2000 MOhm
• Safe Overload: 150% F.S.
• Ultimate Overload: 300% F.S.
• Nominal displacement: < 0.5 mm
• 6-wire shielded cable, 3m long, 5mm diameter